Tunnel Kit - Cable Supported

The BBC-SPRTKT, cable supported batting tunnel kit is designed to attach to your existing building structure, whether steel I-beam columns or reinforced (blocked) studded walls. 9/16” holes will need to be drilled for the ½” eyebolts. If attaching to standard CMU block or concrete filled walls it is recommended that a wood stringer wall mounting kit be used (model number BBC-WLKT), which can be purchased separately. This kit includes six (6) attractive polyurethane finished 24” long, 2” x 8” stringers and mounting plates that are easy to install and help spread the load across multiple CMU blocks or other wall types.

The height of the cables should be set about 12” below the height of the netting itself. This will allow about 12” of netting the lay on the floor to capture the ball. The center cable should be placed about 6” higher than the outer cables.

To maximize your overhead clearance when the net is out of the way and stored against the wall, a cable suspension kit is available that will suspend the net up to 20 ft below the support cables (model number BBC-CSTK).